RTV2 Mold Silicone Rubber

  • RTV2 Two-component liquid silicone foam-TBL-8500 Series
  • RTV2 Liquid Textile Coating Silicone Rubber -TBL-8800 Series

    RTV2 Liquid Textile Coating Silicone Rubber -TBL-8800 Series

    INTRODUCTION
    Textile coating silicone rubber can be firmly adhered to the surface of textiles. Widely used in textile printing of clothing, socks, hats, gloves, etc. It’s platinum cure liquid silicone rubber, FDA food grade, non-toxic, odorless.It can be operated more easily without additives, suitable for both manual and mechanized.

    TBL-8840 is a transparent, high strength, excellent performance of two-component coated silicone rubber. Its viscosity is moderate after mixing the two components, can be vacuum defoaming, and stored at room temperature for a long time, curing material without shrinkage. Through silk screen printing, dispensing and coating process, the product can be used in the garment industry to prepare trademarks, various printing and coated webbing, and can bond all kinds of fabrics firmly.

    APPLICATION
    Silicone rubber for fabric coating is widely used in garment factories; garment accessories factories; printing and embossing factories; hat factories; shoes factories; socks factories, bags and handbags factories; craft gifts factories; embroidery factories; marking and ribbon factories, etc.

    l High transparency

    l Moderate viscosity

    l Strong bonding to the fabric

    l Low linear shrinkage

    l 100% curing, without curing by-products

    l Operating temperature -50℃ to +200℃

    Reference Standards

    Property

    Unit

    Value

    General Properties at  25±2℃

    Visual

    Appearance (A)

    /

    Transparent 

    Appearance (B)

    /

    Transparent 

    ASTM D1084

    mixed viscosity

    mPa.s

    70000±10000

    Operation Properties

    T10/120℃x5min

    30-50s

    /

    /

    T90/120℃x5min

    50-90s

    /

    /

    Properties After Curing

    ASTM D2240

    Hardness

    Shore A

    40±2

    ASTM D412

    Tensile Strength

    MPa

    ≥4.0

    ASTM D412

    Elongation at break

    %

    ≥300

    ASTM D624

    Tear Strength

    KN/m

    ≥15

    1. The mixing rate(by weight):A:B=1:1;

    ADVANTAGES
    * Environmental protection/non-toxicity, FDA food grade silicone

    * Suitable viscosity, not easy to penetrate textile

    * Can set color (multi-layer color), do not fall off when set color, pattern is not single, can form different patterns, silicone printing trend leads the fashion field.

    * Various effects can be printed (bright or matte, round or right-angled effect, thick or thin, large or small patterns), strong stereoscopic effect, soft handle and strong adhesion.

    * High wear resistance, brightness and washability

    * Can firmly adhere to the surface of textiles, non-woven fabrics, dermis, imitation leather and other materials.

    * The effect of wool pressing is good.

    * Solve the problem of firmness of leather and waterproof fabric effectively

    * Printing gloves, clothing, paper, sports goods, etc., cold and heat resistance, skid resistance, silk-printed patterns have a strong three-dimensional feel, and feel soft, and complement each other with textiles or leather goods; silk-printed patterns also have excellent peeling strength, wear resistance, brightness; it also has water-proof, skid-proof, breathable, high resistance, low temperature. And good leveling.

    * Super elasticity, in the normal range of elasticity of the fabric does not fall off, cracking. Printing patterns do not decolor, do not re-dye (not sublimate).

    *Good air permeability, outside water, oil and other pollutants can not enter, while the inside of the hot air can be permeable.

  • RTV2 food grade platinum cure liquid silicone rubber -TBL8100 Series

    RTV2 food grade platinum cure liquid silicone rubber -TBL8100 Series

    INTRODUCTION

    The platinum cure silicone rubber has good fluidity and is suitable for manual operation. There are many choices of hardness 20 shore a is generally used to make cake mold, but some people are prefer to harder silicone such as 40 shore A. In a word, 5 shore A to 40 shore A silicone are suitable for bakery molds of various size of silicone trays.

    TBL-81 series is two-component room temperature platinum vulcanized silicone rubber with high strength and excellent performance for human body. 

    It has extremely low viscosity, can be vulcanized at room temperature and at elevated temperature, and has excellent properties at - 50 ℃ ~ 200 ℃ for a long time. It can be used for various human limbs, including hands, feet, human masks and adult products.

    Product Features

    l Extremely low viscosity fit for making mold easier to discharge foam

    l Excellent tensile and tear strength

    l Low linear shrinkage

    l 100% curing, without curing by-products

    l Excellent temperature resistance, operation temperature -50℃ to +200℃

    l Food grade silica gel, FDA

    l Easy demoulding

     

    Typical Applications

    l Suitable for various molding products.

    l Human limbs include hands, feet, body masks

    l Adult products

    Due to its environmental friendly, non-toxic, tasteless, odorless and high temperature resistant

    properties, Liquid silicone for silicone trays for bakery is an excellent material to make all kinds of

    silicone trays of food, it's a famous mold making material for bakery, widely used for cake mold, bread

    mold, sugar food mold, chocolate mold, simulated fruit mold, cake mold, biscuit mold,etc.

    ADVANTAGES

    1.  Passed FDA food grade certification
    Food grade, non-toxic, tasteless and odorless,

    2. High temperature resistance
    High temperature resistance, applicable temperature range - 40 to 260 ℃, It can be used in microwave oven and oven.

    3. Low viscosity
    The liquid fluid is easy to pour, easy to release the bubbles in the mold, to get perfect and high quality silicone mold

    4. Easy to clean
    After use, the silicone mold can be cleaned by washing with clean water,

    5. Long service life
    The material performance of silicone rubber is stable, and the silicone mold is easy to use, long service life

    6. Soft and comfortable
    Silicone mold is soft and comfortable, good flexibility, easy to operate, not easy to deform.

    7.  Easy demoulding
    The biggest advantage of the silicone mold is anti sticking, so the demoulding of the finished product is particularly convenient.

    Reference Standards

    Property

    Unit

    Value

    General Properties at  25±2℃

    Visual

    Appearance (A)

    /

    Translucent 

    Appearance (B)

    /

    Translucent 

    ASTM D1084

    mixed viscosity

    mPa.s

    2000±1000

    Operation Properties at  25±2℃

    Enterprise standard

    Operation Time

    min

    30-60

    Enterprise standard

    Cure Time

    h

    3-6

    Properties After Curing

    ASTM D2240

    Hardness

    Shore A

    10±2

    ASTM D412

    Tensile Strength

    MPa

    ≥3.0

    ASTM D412

    Elongation at break

    %

    ≥600

    ASTM D624

    Tear Strength

    KN/m

    ≥7

    1. The mixing rate(by weight):A:B=1:1;

     

  • RTV2 Tin Condensation Cure Silicone for Gypsum Plaster Molding- TBL6900 Series

    RTV2 Tin Condensation Cure Silicone for Gypsum Plaster Molding- TBL6900 Series

    INTRODUCTION


            Gypsum molding silicone is a very flexible molding silicone, it request the silicone hardness must not be too hard because gypsum is very delicate, it will break the gypsum products when demolding if the silicone mold is too hard, meanwhile, since plaster mouldings are always very with big size as well as with fine details, so it request the silicone mold be strong enough to resist the damage of the moulds during the demolding process.

    TBL-69 series is a two-component condensation type RTV2 mold making silicone rubber. With good fluidity and low shrinkage rate. It has passed ROHS and REACH certification, and is suitable for the filling process, candles, resin crafts and other molds ect.

    APPLICATION
            It is not only uitable for molding variety of gypsum decorations and plater mouldings, but also suitable for molding art crafts, furniture, architectural elements, garden ornaments, shoe, tire, soap, candle, vacuum bagging, wind turbine blades, ship/boat hulls, aircraft hulls, FRP pipes/profiles, beacon lighthouse covers, military industry, aviation and other fields etc.

            This flexible molding silicone is not only suitable for gypsum and plaster, but also materials such as resin, PU, PVC, polyester, gypsum/plaster, wax etc. 

    ADVANTAGES
    * Low shrinkage
    * Low viscosity
    * Anti-deformation
    * High temperature resistance
    * Not oily
    * No bubbles
    * Excellent flow leveling which will copy finest details and patterns from exquisite products.
    * Durable with excellent tear and tensile strength, guarantee molding times
    * Easily demolding
    * Resist aging, acid, alkali, corrosion and weather aging

    ITEM NUMBER

    COLOR

    Hardness /shoreA

    Viscosity/mpa.s

    Mix ratio

    Operation time /min,25℃

    Curing time/25℃

    Tear Strength /KN/m

    Tensile Strength /Mpa

    Elongation break/%

    TBL-6920

    WHITE

    20±2

    20000±2000

    100:2

    20-40

    4-8h/25℃

    20±2

    ≥3.5

    ≥400

    TBL-6925

    WHITE

    25±2

    25000±2000

    100:2

    20-40

    4-8h/25℃

    23±2

    ≥3.5

    ≥400

    TBL-6930

    WHITE

    30±2

    28000±2000

    100:2

    20-40

    4-8h/25℃

    23±2

    ≥3.5

    ≥400

    Note: The above data operation time and curing time can be adjusted according to customer requirements. Items that require multiple potting and bonding require special adjustments.

     

    Features and Benefits

    •Excellent mobility

    •Excellent tear strength

    • Low shrinkage

    •Excellent high temperature resistance 200-220℃

    • The product is environmentally friendly, certified by ROHS and REACH

    • More times of mold turning

    • Does not oily leak

  • RTV2 Platinum liquid silicone gel potting compound for electronics and breast -TBL8000 series

    RTV2 Platinum liquid silicone gel potting compound for electronics and breast -TBL8000 series

    INTRODUCTION
    Heat dissipation silica gel is a heat conducting material with low thermal resistance, high thermal conductivity and high flexibility. The high flexibility of the material can reduce the pressure required between components and cover the micro uneven surface, so as to make the components fully contact and improve the heat conduction efficiency. It is especially suitable for the heat conduction demand with limited space

    TBL-80 series is a highly transparent two-component addition silicone gel. After the two components are mixed, the viscosity is extremely low. It does not need vacuum degassing. It can be degassed automatically or degassed by a degassing machine. It can be cured at room temperature or heated, and the material does not shrink during curing.

    APPLICATION
    At present, thermal conductive silicone is widely used in motor controller, power supply, computer and automotive electronics. In addition, chip cooling such as military supplies usually involves contact cooling of electronic devices or mechanical structures. It is used to reduce contact thermal resistance and enhance heat transfer at the contact interface, which will directly improve the performance, accuracy and reliability of the equipment or system itself

    •Special for breast pads and stickers - padding for women's underwear

    Precise electronic components - potting protection of module power supply and circuit boards with high requirements for transparency and recovery

    • Potting of liquid tank filter - sealing and waterproofing of instrumentation

    • Silicone puff

    ADVANTAGES
     

    Very high transparency

    • Very low viscosity

    • Low linear shrinkage

    • 100% solids, no curing by-products

    •Operating temperature -50℃~200℃

    •Platinum vulcanization is environmentally friendly and non-toxic

    • Fast rebound

    Item

    Color

    Mix ratio

    Operation time(min,25℃)

    Curing time

    Penetration(1/10mm)

    Viscosity

    TBL-8010

    Transparent

    1:1

    30-50(Adjustable)

    4-6h(25℃)/20-30min(80℃)

    160-180

    1000cps

    TBL-8020

    Transparent

    1:1

    30-50(Adjustable)

    4-6h(25℃)/20-30min(80℃)

    200-220

    1000cps

    TBL-8030

    Transparent

    1:1

    30-50(Adjustable)

    4-6h(25℃)/20-30min(80℃)

    300-320

    1000cps

INQUIRY

    INQUIRY

    CONTACT US

    contact-email
    contact-logo

    Foshan Tian Bao Li Silicon Engineering Technology Co., Ltd.

    We are always providing our customers with reliable products and considerate services.

    If you would like to keep touch with us directly, please go to contact us

    • Home

      Home

    • Tel

      Tel

    • Email

      Email

    • Share

    • Contact

      Contact