Technical Parameter
TBL-6135 is the one component room temperature curing thermal organosilicon adhesive.This product is white methanol ,fast surface dry, good adhesion,high tensile strength rubber. Long term use will not fall off, no contact gap after curing.
Neutral non-corrosive, excellent insulation, moisture proof, earthquake resistance, corona resistance, anti-leakage. Silicone rubber is good adhesion to metals and most plastics, excellent temperature resistance after curing and good effect of hot and cold shock. It can be used at -50~250°C for a long time.
Product Features
Fast surface drying; Curing at room temperature
High bonding strength
No corrosion to the base materials
Operating temperature
-50 ° C ~ +200 ° C
Typical Applications
Bonding and Fixing between bubble shell and base
PCB board component fixing
LED Lamp bonding and fixing
Flood Light/Street Lamp/LED Bulb of Light source plate and cooling interface,etc
Notice
The sealant will be slight yellowing during storage, which will not affect product properties.
Operating Instructions
Clean surface: Please clean up the dust, rust, and oil on the surface of the bonding substrate.
Gluing: Squeeze the sealant onto the cleaned surface.
Curing: Place the glued part in the air, after skin formation, cure continues inward from the surface.Under 25℃ and 55% relative humidity conditions for curing 24 hours, the sealant will cure to a depth of 2 to 4mm, with time prolonged, the curing depth gradually increased.
Storage: The unused sealant should be immediately tightened and sealed. Before using again, remove the crust at the nozzle mouth and do not affect normal use.In the process of storage, the sealant may be a small amount of solidification at the nozzle, which can be used normally after removal without affecting the product properties.
Storage conditions
Store in a cool and dry place below 35 ℃.
Shelf life: 6 months.
Attention
1. Keep away from children.
2. It is recommended to use it in a well-ventilated area to reduce odor.
3. If accidentally touch the skin or eyes, wipe them clean immediately, then rinse with water and seek medical advice.
4. For safety information, please refer to the Material Safety Data Sheet (MSDS).
Packaging specifications
100ml / piece, 100 pieces / Carton.
300ml / piece, 24 pieces / Carton.
2600ml / piece, 4 pieces / Carton.
Special Note
The data in this manual were obtained under laboratory conditions, due to differences in the use environment, users should refer to these data and conditions for analysis and testing. Tian Bao Li does not guarantee the sales of products and the use of Trimble products under specific operating conditions, and does not assume any liability for direct, indirect or accidental losses. If the user encounters any problems during use, you can contact the Tian Bao Li technical service department, we will provide you with the help.
