TBL-9310 series is extrusion fumed type high temperature vulcanized silicone rubber. The product has excellent physical properties and complies with ROHS certification.

Product Features

• High tear strength

• High transparent 

Typical Application

• Silicone tubes

• Silicone Rubber strip products

Instructions for use

• Before use, please read the product instructions and Material Safety Data Sheet (MSDS) carefully, which can be obtained from the sales representative.

• Any of the above performance data and applicable recommendations are for use only as a reference to the performance of TBL products and are not a guarantee of the effectiveness or universality of TBL products in a particular application. The user must decide whether the product is suitable based on the results of his own experiments and tests.

Packing specification

20kg carton, lined with plastic film.

Storage and transportation

• Sealed in room temperature under cool and ventilated conditions, shelf life from the date of production 6 months.

• According to the general chemical transportation, the product should be protected during handling and transportation to avoid collision, heavy pressure and rain.

Matters needing attention

• Each processing is subject to all applicable legal rules, including authoritative legislation.

• We reserve the right to change product constants without prior notice.

Remarks:

 Vulcanization conditions: 120℃×10min, the addition ratio of vulcanizing agent is 1.3%, and the main components are 2,4-Dichlorobenzoyl peroxide (DCBP).

The test method is carried out in accordance with the latest version of the standard.

The physical data listed in the above table are for reference only. If you need the inspection report of the goods, please contact the sales staff.

Silicone rubber material is an top notch fabric for producing extruded sealing profiles, which can function at excessive and low temperatures. Silicone rubber performs properly when uncovered to UV, weathering, ozone and moisture, and is reachable in a vary of grades, hardnesses and colours, every with its personal set of characteristics, houses and resistances to go well with extraordinary exposures and environments.

Extrusion silicone rubbers are produced through turning uncooked silicone rubber fabric (compound) into a unique structure by an extruder computer that works the use of excessive strain and a die (a formed tool). This laptop pushes uncooked fabric thru the die growing the completed extruded rubber profile, in non-stop lengths, with a steady cross-sectional structure as per the customer's layout going for walks throughout.

Extrusions can be made as a ‘solid’ structure such as a cord, or ‘hollow’ the place a hole, normally in the centre, runs thru the whole size of the extrusion simply leaving the outer wall. Some of the most in many instances used extrusions are D-sections, P-sections, door seals, window seals, U-channels and cords, many of which can be furnished with a self-adhesive finish.

This high-performance elastomer used to be initially created with the cause of insulating turbines and electric powered motors. 

Today, HTV silicone rubbers for extrusion and sponges are used for a widespread myriad of rubber parts, components, and gaskets.

Key Properties & Characteristics of Silicone Rubber

As we until now mentioned, silicone rubbers are top notch for more than one excessive and low temperature applications. It boasts gorgeous resistance to ozone and weathering, which makes it a appropriate elastomer for out of doors applications. However, silicone rubber isn't always resistant to superheated steam. It additionally has low fuel permeability with minimal resistance to petroleum-based fluids.  

• Key Attributes of Silicone Material
• The major fabric silicone is an natural elastomer that boasts:
• Solid resistance to compression set
• Excellent resistance to excessive temperatures 
• Great retention of flexibility 

Any component, seal, or gasket made from silicone will have sound resistance to moisture, oxygen, and ozone.