TBL-8780 series is two-component addition type liquid silicone rubber, which has high and low temperature resistant character,good weather resistant character, high transparent grade, good anti-tear intensity, good tensile character, good resilience character, and goog anti yellowing character.
This series product has the character of fast high temperature curing shape forming speed, adopts the liquid injection molding process technology. It is widely used in manufacturing of food grade products,such as sports goods diving mask,frog legs etc.
Color: Transparent
Application: Sports Goods; diving mask; frog legs,etc
Appearance: Colorless Transparent Liquid.
Product name: Liquid Silicone Rubber.
Hardness Shore A: 30 - 80.
Features: High transparency;High strength;Fast cure speed.
Shelf life: 12 Months.
HS code: 3910000000.
Viscosity: Favorable.
Product Presentation
This product doesn't use substances prohibited by ROHS instructions, and hazardous substances shall be implemented according to ROHS instructions. The third party certification reports such as ROHS, REACH and FDA will be updated every year.
Travel Release Of Liability
All above suggestions on using are based on our experience. Consumers must conduct their own experiments and analysis to determine whether these products are suitable for the special use of users. In no case shall we be responsible for the end use of the consumer. Every procedure must be adapted to all legal rules and authoritative legislation.
Product Presentation
This product doesn't use substances prohibited by ROHS instructions, and hazardous substances shall be implemented according to ROHS instructions. The third party certification reports such as ROHS, REACH and FDA will be updated every year.
Travel Release Of Liability
All above suggestions on using are based on our experience. Consumers must conduct their own experiments and analysis to determine whether these products are suitable for the special use of users. In no case shall we be responsible for the end use of the consumer. Every procedure must be adapted to all legal rules and authoritative legislation.
How To Use
1．We suggest that the consumer use the liquid injection molding machine to inject into the mold and manufacture products.
2．The two components of A and B must be completely mixed according to the weight or volume ratio of 1:1. The vulcanization time is determined to the mold temperature.Under high temperature conditions,the short time required for product molding. If the silicone product is thick and large, it takes a long time to form.
Packaging, Storage and Caution
1.This series of product is packed in 20KG/Plastic Straight Barrel or 200KG/Iron Drum,linked with plastic bags.
2.Products should be sealed and stored in a cool place, prevent rain and sunlight exposure.
3.This series of products are non-dangerous goods. The valid period is 1 year. If the product exceeds the shelf life, test it again, and it can still be used after passing the overdue inspection.
4.Avoid contact with condensed type silicone rubber vulcanizing agent during operation. Amines, Sulfur and Phosphorus-containing compounds and some metal salts may cause liquid silicone rubber without vulcanization.
|
Item & Model
|
TBL-8780-30
|
TBL-8780-40
|
TBL-8780-50
|
TBL-8780-60
|
TBL-8780-70
|
|
Proportion
|
1:1
|
1:1
|
1:1
|
1:1
|
1:1
|
|
Appearance
|
Transparent
|
Transparent
|
Transparent
|
Transparent
|
Transparent
|
|
Viscosity/ mPa.s
|
70×104
|
80×104
|
90×104
|
100×104
|
120×104
|
|
Hardness/Shore A
|
30
|
40
|
50
|
60
|
70
|
|
Tensile Strength/MPa
|
8.0
|
9.0
|
9.0
|
9.0
|
8.0
|
|
Elongation/%
|
700
|
600
|
500
|
400
|
300
|
|
Tear Strength/kN/m
|
20
|
25
|
30
|
30
|
30
|
|
Specific Gravity/g/cm3
|
1.11
|
1.12
|
1.12
|
1.13
|
1.13
|
|
Molding Condition: 130°C X 5Min
|
|
Above data for reference only, factory inspection report shall prevail for latest testing standard and data.
|
One of the latest and greatest forms of alternative fuel technology known to mankind is Medical Grade Liquid Silicone. This revolutionary material has the ability to create an environmentally friendly alternative fuel system that is both affordable and efficient. It's main ingredients, silicone and propylene glycol, are FDA approved and have been proven to create a safe vehicle for use. The Medical Grade Liquid Silicone used in this system have been developed, tested and re-tested over many years. They are all naturally sourced and meet very stringent guidelines set forth by the FDA. These materials will be blended with other synthetic ingredients in a specially-designed mixing tank to create a finished product that will then be distributed for sale.
Silicone and propylene glycol are commonly found in a variety of medical applications. These ingredients have the ability to act like both a plastic and rubber band when applied to certain materials such as, bones, cartilage, and other connective tissue. These two liquid materials can form a gel when placed in an appropriate solution. This gel has the ability to expand upon itself when heated by an electrical current. This expansion of the material creates a larger volume of gas that can be recycled into an alternate fuel system.
Medical Grade Rubber is made out of a material called Dimethyl Sulfate, also known as DMS. The material is completely natural and free from chemicals, toxins and is very safe to work with. DMS is used in a vast array of fields such as dentistry, pharmaceuticals, food processing, and hygiene. This material can also be used to create gloves and other medical apparel and tools. All Medical Grade Liquid Silicone Rubber will come with detailed manufacturer instructions.
The mixing of silicone rubber and propylene glycol is done in a mixing tank that contains a specialized mixture of solvents. The temperature of the solution will dictate how much solvents will need to be added to ensure the proper chemical reactions will take place. When the proper amount of time has passed, the mixture will then be poured into the molded shell of the tool or implement. The silicone rubber will be allowed to solidify and create a strong yet malleable exterior.
After the silicone rubber has been allowed to solidify it will be packaged and shipped to manufacturers. Manufacturers will place the rubber base into molds that will be designed according to the customer's specifications. The molds are typically manufactured at a temperature of 75 degrees Fahrenheit. When the mold is created it will be inspected by quality control personnel for any defects. Any defective parts will be replaced and the production will continue until all defects have been corrected.
Once all parts have been inspected and deemed to be in working condition, the finished-Medical Grade Liquid Silicone Rubber product will be delivered to dealers. Dealers will then sell the Medical Grade Liquid Silicone Rubber to medical professionals, professional athletes, and enthusiasts around the world. There are numerous distributors online with convenient home delivery. In addition, many distributors offer free shipping when purchasing the Medical Grade Liquid Silicone Rubber.
